Mas'71 works mini pamphlet.

[sithlrd98]

Quit it!  I have to keep bulldozing your works to put in your new works!  Just kidding Mas san , your works are always welcome in my cities! 

[toxicpiano]

They look great, Mas san. May I request a piece where there is only concrete and no grass?

[MAS71]

  Thank you always for a lot of warm voices frineds !! 
and Nice to meet you too friends who visit to here at first. 
I'm sorry to my English posts that hard to read(understand).  I have to apologize for that first. 

@toxicpiano
Lot of "only conrete(no grass)".
Yes, I already made it. but I troubled with that should I include them in to next pack.
because, I guess a lot of icons added does hated for many mayors.
but I will not intend to collect the a lot of LOTs all together next time too.
so Each user will choose LOTs you needed from them freely. I thnk so and I'll include it.

By the way, About a LOT "No grass" you said.
I like these little grass(weeds) both each concrete blocks.
Don't you like these little grass ?? Do you hope NO-Grass at all ??

Please tell me again your opinion directly.


well,
I list up LOTs that will include next LOTs pack.(Tentativeness. I already finished maked.)
1. 90deg More Smooth Inner Curve (7x7)
2. Orthogonal Concrete Walls 2x1 (familyx5)
3. Orthogonal Concrete Walls 2x1 (No grass)
4,5. Diagonal Concrete Walls Right/Left-End (connect to default slopes)
6,7. Diagonal Concrete Walls Top/Bottom(familyx3)
and the Water Gate. It's will be little one of LOT conected suspectly with other works (canals works).
and a exesting Water Lot (2x2) will enlarge to 3x3(plop size : 1x1) maybe.

I'll report again.
Thank you frineds. 

[toxicpiano]

It looks very nice my friend. For industrial areas and ports I was thinking you should remove the grass here:



I think there should be a version with no grass as well 

[Fatsuhono]

Arigato Mas-san! But, there is a problem with the JPN rivers: when you place a piece, you have to re open menu each time to place another. Can you undo this?

[CasperVg]

That's a known issue with MMLs, there's nothing that can be done regarding it. You could delete the MML-lot, but then the lots will be all over your menu again (not under one icon)

[MAS71]

@Taxicpiano
Oh ! I see !    (A slope fo a raod side.)
You say that should change grass slope to a concrete block by road side of slope don't you ?? 
I didn't have idea to used my river for Industrial or Ports area.
By the way.
I talked with some Japanese BATer in my wiki's bbs yesterday.
He making some walls with design like this(you hoping) for a shorline. so I'll wait more details a little of his works.
and I'll examine again about LOTs for Industrial versions after look his works.
(I know it will have a little issue with a point for joint with basicaly grassLOTs. )
Please wait a little for my answer at last. 

Thanks again for your opinion Taxicpiano !!



@Fatsuhono san
Thanks for answering Caspervg. Yes, That's right. 
Fatsuhono san, Please read again a column of the "MML" in a README. 
Please remove a file "zz_Mas71_JRP-MML_080623.dat" in your Plugins when you plop a lot of LOTs in a game.

-Japanese
リードミーファイルのMMLの欄をもう一度読んで下さい。
一度に沢山のLotを設置する時は、"zz_Mas71_JRP-MML_080623.dat" のファイルをPluginsから外して下さい。
MMLはアイコンを減らす便利なLotですが、導入していると同じLotが連続して置けないと言う仕様が惜しまれますね。

[Fatsuhono]

Oh, I am sorry then, I missed that, please forgive me! Great works!

[MAS71]

@Fatsuhono san
No problem, Take is easy ! Have a good time with my rivre please. 


well,
I used a lot of time (also a half of day) to make some textures. and I did fight again with Vertex of slopes. 
I feel again that the expression of the water is very difficult.

-- Todays's development. - Water Gate : to Connect with other canals.






This is a connected-Lot for narrow canal. and I'll make this Lot for wide(x2) version too.


Thank you again friends for visit my thread everyday.
-Mas'71

[Unassigned]

Such small, everyday items; a river bank and a water gate. And yet your version has such aesthetical purity. This humble amateur may use your works, but can never hope to do them justice.

Will you be making water locks for ships, too?

[jacqulina]

excellent work mas my friend

[sithlrd98]

Beautiful! I am very impressed with all the details that have gone into this project.    I eagerly wait for more updates! 

[Filasimo]

SUGOI!!!     thats one amazing update mas-san.....if make a 2x version, you should make one where it has a right piece, center piece, and left piece so players can make the gate as wide as they want....cant wait to see what you make next mas-san, hopefully some waterfalls. hehe 

[jeronij]

MAS san,

I just can say "Chapeau" ¡¡¡ 

This is one of the best wall set I have seen in a long time, and you are really making a new standard  . This is a "Must Have" right from the beggining 

Thanks for sharing the development with us ¡¡¡



I read some pages ago that you tweaked every single vertex in the slopes....  .... wow, this is quite a huge task  ¡¡¡, you are a patient man indeed.  Regarding this, with delay, my suggestion is that you make the slopes separate meshes/polys, then you add more geometry (surface subdivision) to them, so you have three or four times more vertex in the same surface. Then you apply the noise, only to groups of vertex, or to all the vertex at one. Dont forget to check the fractal noise. This should give the slopes an enough irregular look, with not so much work. I hope this may help you somehow 

[MAS71]

I'm very tired to fight with B.A.T tonight too.  
Tonight enemy were a lot of PIPEs. They were powerful and strong for me. (lol)

I'm going to my bed now, before , I up a pic that finished make the Water-Gate for Narrow.....


sorry friends, I'll reply again to your each voices next night.

Have a nice dream friends !!  

[JoeST]

MAS san,

OMG!!!!!!!!!!!!!!!!!!!!!!! WOW

that is genuinely absolutely amazing

Thankyou very much

Joe

[sithlrd98]

Now that is a gate!    It is too bad that the game can't display these works as you have rendered . Great work Mas san

[Alfred.Jones]

That is incredible Mas-san

Thank-you for uploading the prop pack 3 as well. I have already began making a city based around these lots. I will try to post a picture later of the water system made using these.

Very nice work

AJ

[Filasimo]

narrow huh? so what ya trying to imply mas-san? we can have a variable width version so we can make the gate as wide as we can?  cant wait to get my hands on them! sugoi!

[MAS71]

JRP-PROP Pack Vol03 was updated 02,July,2008.
It's had little problem with a zoom-2 of some models. I corected them.
I'm sorry to you use your time. Please re-downlod it and remove old one. 



- JRP Addon Lot Pack 01 -
### JPN River Project - Sunken River Puzzle Pieces ###

Down Load Page is HERE (on SC4D Lex)

< Essential >

JRP-PROP Pack Vol03 (on SC4D Lex)

MAS71 PropPack Vol03 (on SC4D Lex)

At first, Thank you again frineds for your some opoinions and advices for this works. 
I finished upload them on LEX now thanks to you !! 
This zip included some additional LOTs of the JRP.



<Details>
Sunken Canal Puzzle Pieces Pack
Lot size : 1x1, 2x1, 3x1, 4x1, 3x3
Plop Cost : $100 - $500
Monthly Cost : none
Bulldoze Cost : $5 - $30
Park Effect : +8 / 8R /piece and more
LandMark Effect : +4 / 8R /piece and more
Demand Satisfied : R$+200 R$$+100 R$$+50 /piece

All icon added in Seaport menu.

LOTs should ploped on a SLOPE basically.
Please create terrain for them beforehands to lower 10m(or 15m) for bottom of the water.
and Please read a README file for more details in zip.

----------------------------------------------------------------------------------------------------

< Some Added Lots Detaisl >
- 90deg Large Inner Curve -

You can seem that more smooth corner with this LOT.



- Water Gate -
These LOTs are not able to connected to some canals(river) smooth.
Please enjoy only an atmosphere with them. 
I'm glad to "co-staring" with Jeronij and Callagrafx staffs.





----------------------------------------------------------------------------------------------------

< MML (Menu Management Lot Mod) >

MMLing Lot is updated.
### Please remove old-version in your Plugins beforehand. ###

Latest Version : zz_Mas71_JRP-MML_080630.dat

Please remove a MML-file in your Plugins-folder when you want to plop a lots of JRP-LOTs.


----------------------------------------------------------------------------------------------------

< Recommendation >
I recommend the thing used to this work simultaneously with the following works please.
<for Diging Lot>
・Hole Digging Lots by Smoncrie (on STEX)
・NHP Hole Digging Lots by Shadow Assassin

(on SC4D LEX)
<for Terrain Assistance>
・Diagonal Jagged Edges Mod by pjot (on STEX)


----------------------------------------------------------------------------------------------------

< Dependencies >
Please use following files same time when you want to displayed a Guid-Arrow when ploped LOTs in the game.
01_Mas71-Walls2_Essentials.dat in my

WallsPack2
but it's not an essentials.





Before,
I'm sorry frineds, Filasimo and  Toxicpiano about your good idea and requests.....

About "Concrete Walls for Industrial or Seaport Area" and "Variable width version of the Water-Gate"
They have some little problem with LODing.  so They need to reshaping of the design's origin more little.
Please wait a next addtional LOTs Pack !! I'll do the best for them !!
Thank you again friends for you opinions and idea for my project.

and Thanks so much all of friends who visited and gave me some voices always in here !! 
Enjoy my works. 

-Mas'71