CAM - Stage Density Limits and Stage CAPs

[RippleJet]

Stage Limits (Stage versus Density)

In order for the RCI development to function as intended, it is important that each higher stage has a denser population than each previous stage. Thus the stage is depending not only on the occupancy of the building, but also on the size of the lot. The higher the occupancy and the smaller the lot, the higher the stage will be.

The values in the table below show the recommendations on what population density (jobs/residents per tile) that will trigger each growth stage to be selected for the CAM.
The stage in the leftmost column should be selected, if the population density exceeds the corresponding value in the table:

Stage	R$$$	R$$	R$	CO$$$	CO$$	CS$$$	CS$$	CS$	I-HT	I-M	I-D
2	0,9	1,7	3,4	4,0	4,8	4,0	8,0	16,0	7,5	6,3	5,0
3	1,3	2,5	5,0	6,5	7,8	7,0	14,0	28,0	12,2	10,2	8,1
4	2,0	4,0	8,0	10,5	12,6	10,2	20,3	40,6	19,1	15,9	12,7
5	4,3	8,5	17,0	19,0	22,8	13,3	26,7	53,4	28,9	24,0	19,2
6	14,0	22,5	36,8	45,0	54,0	16,8	33,6	67,3	42,1	35,1	28,1
7	35,9	51,6	74,5	90,0	108	21,2	42,4	84,7	59,4	49,5	39,6
8	74,4	105	149	142	170	26,7	53,4	107	80,9	67,4	53,9
9	125	176	249	198	237	33,6	67,3	135	106	88,6	70,9
10	177	250	354	259	311	42,4	84,7	169	135	112,5	90,0
11	231	327	463	328	393	53,4	107	214
12	288	407	575	408	490	67,3	135	269
13	346	489	692	503	604	84,7	169	339
14	406	574	812	618	741	107	214	427
15	468	662	937	757	908	135	269	538

You may still select a growth stage immediately above or below the suggested one, within a rather tight tolerance, eg. in order to fit several buildings belonging to the same family into the same stage.


Farms

Agricultural lots do not upgrade. Thus it is not equally important that each higher stage farm has a denser population than any previous stage.
The guidelines for setting the farm stage involves the complete number if jobs offered by the farmhouse.

The values in the table below show the recommendations on what occupancy (jobs) that will trigger each growth stage to be selected for the CAM.
The stage in the leftmost column should be selected, if the number of farm jobs exceeds the corresponding value in the table:

Stage	I-R
2	16
3	40
4	90
5	180

Stage CAPs

The CAM is bringing two basically unused stage caps into use, the Park Cap (which in RH is used only for R$$$, set at stage 3), and the Fire Cap (which is unused in RH).

The park cap means that, in order to grow past the stage set, the lot has to be within 20 tiles of any kind of park.
The fire cap means that, in order to grow past the stage set, the lot has to be within the coverage area of a fire station.

The table below summarizes all stage caps that are available and used in the CAM.
If an RCI type is capped at a certain stage, it cannot surpass that stage without getting what is capped.

RCI	Power	Water	Park	Fire	Max.
Type	Cap	Cap	Cap	Cap	Stage
R$	0	3	12	-	15
R$$	0	3	9	12	15
R$$$	0	0	3	9	15
CS$	0	3	-	-	15
CS$$	0	3	12	-	15
CS$$$	0	0	9	12	15
CO$$	0	3	12	-	15
CO$$$	0	0	9	12	15
I-R	0	3	5	4	7
I-D	0	1	-	5	10
I-M	0	1	-	5	10
I-HT	0	0	6	3	10