[mgb204]

Here you go...

Praiodan Prop Family ID Range:
0x5F85F600 --> 0x5F85F6FF

Find a complete ID listing attached (zip file) for reference.

[praiodan]

Perfect, thanks a lot! 

[khimera]

Hi mgb204,
Could I get a prop family range please?

Thank you!

[mgb204]

Looking at your previous post in this thread, can I ask what you plan to use the Prop Family for? Families are a very specific thing which required dedicated IDs. Regular props and models do not need dedicated IDs and should not be confused with Families. If this is what you are making, you should use a random ID, which the Reader is happy to generate. The odds of such a random number conflicting with existing content are lower than winning the lottery.

[Kitsune]

Can I get a range for something personal I'm working on ?

[mgb204]

Kinsune Prop Family ID Range:
0x5F85F700 --> 0x5F85F7FF

Find a complete ID listing attached (zip file) for reference.

[thingfishs]

Hi, it looks like I'm going to need to create a new prop family (from the models in an SHK pack), to complete my current project. Unless I'm misunderstanding (it wouldn't be the first nor the thousandth time), I will need to get a range - cheers.

[mgb204]

What exactly is it you want to do with those models?

[thingfishs]

I am wanting to make a prop from this SHK pack: http://community.simtropolis.com/files/file/27563-shk-parking-pack/
that performs 2 things differently from the 4x CarCluster prop family I am currently using from the above pack:

1: I want it to perform like the Maxis prop family I was using previously (this time a 5x car prop family) in that there could be anywhere from 1-5 cars on the lot whereas with the SHK one there is only ever a full lot (4 cars).

2: I don't want there to be luxury cars like BMW's on the lots as I am creating a low wealth pack and they just don't look right.

This has mostly been discussed here: http://community.simtropolis.com/forums/topic/34247-thingfishs-bats/?page=3

Cheers

[mgb204]

Sorry for the delay in getting back to you. Looking at things, I think you probably will need one, but there are various ways to go about what you need. I'll reply over on ST regarding that.

thingfishs Prop Family ID Range:
0x5F85F800 --> 0x5F85F8FF

Find a complete ID listing attached (zip file) for reference.

[thingfishs]

Thanks mgb

I hesitantly began my first foray into prop family construction and barely ten minutes later had a fully functioning family with all 20 of my low wealth shops. Sometimes when people say things are simple they actually are...

Thanks for your help.

[Krasner]

Hello there,

I need two family ranges for three props each.

Thanks !

[mgb204]

Hi Krasner,

A little look back through this thread and you'll see that we don't give out individual IDs, the reason being that keeping track of them would be an administrative nightmare that way.

If you really just need to make two families and don't see yourself using families much, I'm happy to pass on a couple IDs from my range, just send me a PM if you want them. Otherwise, I'm happy to give you a full range of IDs for future use if you prefer, just reply here and I'll allocate a range to you.

[Krasner]

@mgb204 Does it mean that I can make several families with a single range ? I should try to inform more carefully before attempting new modding tips  I'd rather have a range then, thank you !

[mgb204]

Basically each family needs a single ID, each item that uses that same family only need to reference the one ID though. You only need a new ID for each unique family.

Krasner Prop Family ID Range:
0x5F85F900 --> 0x5F85F9FF

Find a complete ID listing attached (zip file) for reference.